Analysis of the causes of abnormal noise of the no card rotary cutting machine

No card rotary cutting machine is one of the equipment we often use, in order to ensure the quality of products, some matters need to pay attention to, now let's carefully understand this knowledge introduction?

The manufacturer will seal and package the machine before delivery. In order to ensure the normal use of the machine and equipment, the machine will not be used before packaging. It will only be tested before leaving the factory and packaged immediately after testing. Therefore, the machine will not be lubricated before packaging. Therefore, before we use it, we need to add lubricating oil to the no sticking rotary cutting machine, and drip lubricating oil at each blade and socket. If there is no lubricating oil, sometimes there may be some noise, which has nothing to do with the quality of the product.

In addition, the reason for the abnormal sound may be that the wood is blocked in the process of operation, and the residual sawdust is not cleaned normally after use. If the sawdust is not cleaned in time, the discharge port will be blocked, resulting in incorrect discharge and abnormal sound.