Daily Maintenance Techniques for Plywood Hot Press

The plywood hot press is mainly used for processing and producing various specifications of plywood and wooden products. During use, attention should be paid to the following aspects:

1.Before operation, check whether all parts of the hot press machine are normal, such as the hydraulic system, electrical system, heating system, etc.

2. During operation, the plywood should be placed on the pressure plate first, and then the pressure plate should be lowered to make it tightly fit with the plywood.

3. After starting the hot press, heating and pressure adjustment should be carried out as needed.After the heating time is reached, stop heating.

4. After the plywood has cooled down, the pressure plate can be loosened and the plywood can be taken out.

Daily maintenance of hot press:

A hot press is an important processing equipment that requires daily maintenance to maintain its normal operation. Here are a few precautions:

1. Regularly check the hydraulic system, such as whether the oil is sufficient, whether the pipeline leaks oil, and whether the solenoid valve is normal.

2. Regularly check the heating system, such as whether the heating tube is burnt out and whether the temperature controller is normal.

3. Regularly check the electrical system, such as whether the switch is sensitive and whether the wiring is loose.

4. Regularly clean the surface and interior of the hot press to keep the equipment clean and tidy.

5. Pay attention to preventing the hot press from overloading or working continuously for a long time to avoid damaging the equipment.

Hot press failure inspection:

During the use of a hot press, there may be some malfunctions that need to be promptly resolved. The following are several common faults and troubleshooting methods:

1.Hydraulic system failure:such as insufficient pressure, pipeline oil leakage, etc. It should be checked whether the oil is sufficient, whether the pipeline leaks oil, and whether the solenoid valve is normal.

2.Heating system malfunction:such as burnt heating pipes, malfunctioning temperature controllers, etc. The burnt heating tube should be replaced, and the temperature controller should be repaired or replaced.

3. Electrical system faults: such as switch failure, loose wiring, etc. The switch should be checked for sensitivity and loose wiring.

4. Plywood unevenness: such as uneven surface of plywood. It should be checked whether the pressure plate is flat and whether the plywood is improperly placed.

5. Insufficient pressure: If the required pressure cannot be reached. It is necessary to check whether the hydraulic system is normal and whether the pressure gauge is malfunctioning.

In short, for the daily maintenance and troubleshooting of hot press machines, it is necessary to have a certain understanding and experience of the equipment. Regular inspection and maintenance of the hot press can extend its service life and improve work efficiency. two